Picture shows exemplary Type HD 50
Picture shows exemplary Type HD 10
0,00 m
| Hose Type | Type HD — High Pressure Fuelling Hose (without helix)| Product Name | Type HD |
|---|
| Part Number | HD |
|---|
| Short Description | High Pressure Fuelling Hose (without helix) |
|---|
| Description | 'Yellow Band' high pressure fuelling hose without helix for reel operation. Ideal for all petroleum based products. Temperature range -30° up to +90° C (temporarily up to +110° C). Electrical conductivity <106 Ohm. Corresponds to EN 1761. Can be calibrated according to European regulations. Approved acc. to German military standard VG 95 955 Typ D. Corresponds to EN 12115. |
|---|
| Comment | The lining is resistant to swelling, solubility and discolouration. It is flexible at low temperatures. The cover is resistant to abrasion and weathering and furthermore provides a very good low temperature flexibility. Meets the material group NBR 1 of the EN 12115.
Please note: When used for suction the distance between the pipe ends must not be larger than the inner diameter. Hose clamps type SK see catalogue page 291. |
|---|
| Lining | Nitrile rubber (NBR) black, no fuel-solubility |
|---|
| Reinforcements | Two low tensile textile braids for extreme low volume increase under pressure |
|---|
| Cover | Chloroprene (CR), black, conductive |
|---|
| Certificates | DNV • GL - type examination certificate for fuelling hoses. |
|---|
| Marking | Yellow bands every 4 mtr. and continuous, vulcanised embossing.
Please note: Marking of HD 10 with longitudinal yellow stripe. |
|---|
| Marking Sample | ELAFLEX HD 40 · MINERALOELPRODUKTE · 90° C · PETROLEUM PRODUCTS · EN 1761 · Ω · 25 BAR · · ContiTech · MADE IN GERMANY · (Batch No.) · 3Q-16 |
|---|
| Size | DN 10 to DN 100 |
|---|
| Product Sheet | Page 103-104 |
|---|
| PDF Certificates | DNV • GL - type examination certificate |
|---|
![]() |
|---|
| Size (ID) | ID 10 mm (3/8")| Product Name | ID 10 mm (3/8") |
|---|
| Part Number | 10 |
|---|
|
|---|